Model Number: N108-1222TBBIG01-H13
Brand Name: Newvision
Origin: China (mainland)
Small Orders: Accepted
Key Specifications/Special Features:
1 LCD Size 1.08 inch(Diagonal) -
2 Display Mode Normally black -
3 Resolution 128(H)RGB x 220(V) -
4 Dot pitch 0.108(H) x 0.108(V) mm -
5 Active area 13.824(H) x 23.76(V) mm -
6 Module size 16.12(H) x 29.76(V) x1.52(D) mm -
7 Color arrangement RGB Vtertical stripe -
8 Interface 4 Line SPI -
9 Drive IC GC9203 -
10 Luminance(cd/m2) 400 (TYP)
11 Viewing Direction All View
12 Backlight 1 White LED
13 Operating Temp. -20℃~ + 70℃ ℃
14 Storage Temp. -30℃~+ 80℃ ℃
15 Weight 1.2 g
Shipping Information:
FOB Port: Shenzhen
Lead Time: 15
- 20 days
HTS Code: 9013.80.90 00
Dimensions per Unit: 1.612 × 2.976 × 0.152 Centimeters
Weight per Unit: 2.65 Grams
Units per Export Carton: 3000
Export Carton Dimensions L/W/H: 38 × 35 × 25 Centimeters
Export Carton Weight: 9.2 Kilograms
Main Export Markets:
Asia
Central/South America
Eastern Europe
Mid East/Africa
North America
Western Europe
Any third-party trademarks or images shown here are for reference purposes only OLED Display Module. We are not authorized to sell any items bearing such trademarks.
In this smart age, industrial touch screens have become a necessity in life LCD Module. But what are the tips for choosing industrial touch screens? Many people may not know, the editor below will introduce it to you Active Matrix.
Tips for choosing an industrial touch screen 1. If you are using a capacitive industrial touch screen, it is recommended that you first install the drivers required for the capacitive industrial touch screen according to the requirements of the manual when you use it for the first time, and then use your finger to click on the screen in turn Start/Program/MicrotouchTouchware, so that the screen calibration program can run correctly. After the calibration is completed, the system will automatically store the calibrated data in the register of the controller, and then restart the system, there is no need to calibrate the screen Passive matrix OLED.
Tips for choosing an industrial touch screen 2. If you are using a resistive industrial touch screen, if you find that the cursor does not move or can only move in a partial area, you can check whether the touch area of the touch screen is pressed by other touch objects. For example, once the touch screen is pressed by the display shell or the cabinet shell, it is equivalent to a certain point being touched all the time, so the coordinate position fed back to the controller is not accurate, and of course the cursor cannot be positioned correctly. If the cabinet shell is pressed against the touch area, the distance between the cabinet and the display screen can be increased. If the display case is pressed against the touch area, you can try to loosen the screws of the display case.
Tips for choosing industrial touch screen 3. In order to ensure the normal operation of the industrial touch screen system, in addition to ensuring the correct installation of the system software, you must also remember not to install two or more touch screen drivers on the host, which will easily cause the system to run Conflict, so that the touch screen system cannot be used normally TFT LCD module.
https://www.newvisionlcd.com/tft-lcd-arduino/