Dimmable constant current driver wall pack

0 votes
asked Jul 20, 2022 in 3D Segmentation by netcec001 (677,960 points)
Description:

 

 

The FD-80H-xxB Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 1.9A of output current and a maximum output voltage of 54 V for 80 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include dimming control, lightning protection, over voltage protection, short circuit protection, and over temperature protection.

 

 

 

 

 

Featutre:

 

 

High Efficiency (Up to 91%)

 

 

Active Power Factor Correction (Typically 0.99)

 

 

Constant Current Output

 

 

Dimming Control

 

 

Lightning Protection

 

 

Waterproof (IP67)

 

 

All-Round Protection: OVP, SCP, OTP

 

 

Complies with UL8750 & EN61347 Safety Regulations

 

 

 

 

 

Application:

 

 

moving signs

 

 

Backlighting

 

 

LED-based decorative lighting

 

 

LED-based architectural lighting

 

 

LED stage and theater lighting

 

 

LED electronic displays

 

 

 

 

 

Specification:

 

 

Input Voltage90 ~ 305 Vac

 

 

Input Frequency47 ~ 63Hz

 

 

Input CurrentMax 1.3A/100Vac 0.6A/220Vac, full load

 

 

Inrush Current50A/230Vac 25°C, cold start

 

 

Leakage Current1 mA at 277Vac 50Hz input

 

 

Power Factor0.99/110Vac 0.96/220Vac

 

 

Ripple & Noise3% of Voltage

 

 

Line Regulation5%

 

 

Load Regulation5%

 

 

Dimming ControlOperation via potentiometer or from an input signal of 0 – 10 Vdc

 

 

Four recommended implementations

 

 

Over Voltage ProtectionLatch mode. Power supply shall return to normal operation once powered off/on.

 

 

Over Temperature Protection110°C

 

 

Short Circuit ProtectionNo damage shall occur when any output operating in a short circuit condition.

 

 

The power supply shall auto-recover when the fault condition is removed.

 

 

Operating Temperature-35°C ~ +70°C

 

 

Operating Humidity10% to 100% RH

 

 

Storage Temperature, Humidity-40°C ~ +85°C, 5% to 100% RH

 

 

Safety StandardsEN 61347-1, EN61347-2-13, UL8750

 

 

Compliance to UL1310 Class 2, UL1012 UL935, CAN/CSA-C22.2 No. 0,

 

 

CSA-C22.2 No. 107.1, CSA-C22.2 No. 250.0

 

 

EMCCompliance to EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547,

 

 

EN 61000-4-2, 3, 4, 6, 8, 1-1

 

 

MTBF350,000 hours 110Vac input, 80% load and 25°C ambient temperature (MIL-HDBK-217F)

 

 

Lifetime100,000 hours at 45°C ambient temperature

  https://www.fahold.com/led-canopy-light-driver/

Please log in or register to answer this question.

Welcome to Bioimagingcore Q&A, where you can ask questions and receive answers from other members of the community.
...