Double layer coating thermal ctp plate huaguang positive thermal CTP plate
Transport and storage
Plates
should be kept at a place dry and cool. The shelf life could be up to
12 months with a temperature between 15-30°C and RH 25-60%. They also
should avoid the place where is too close to water tank, chemical
reagent or direct sunlight. Plates should be used up as quickly as
possible after unpack and they should be put in the original package and
take measures to avoid light if they need short-term storage. Usually,
under the yellow light, it can be left for 8 hours, and 2 hours under
white or natural light.
Operation
Unpack
under day light or yellow light, it is suggested that the plate making
room avoid natural light. For manual or semi-automatic plate-making
equipments, when loading and unloading plates, we should avoid scratch,
which may in uence plate properties.
TECHNICAL DATA
TP-U DOUBLE LAYER THERMAL CTP PLATE
Plate Type
Positive working, no preheat thermal digital plate, with optional postbake for longer runs
Application
Medium for sheetfed, web offset press
Substrate
Electrochemically grained and anodized aluminum substrate
Gauge
0.15/0.20/0.25/0.30/0.40mm
Maximum width
1320mm
Spectrum scope
800-850nm
Platesetter compatibility
All the main brands in market, like Kodak Trendsetter/ Lotem/Magnus, Screen PT-R, Heidelberg Topsetter/ Suprasetter etc.
Sensitivity
110-130mj/cm2
Safe light
Unpack it under day light or yellow light and the plate making operation should avoid high light.
Coating color
Dark blue
Dot reproduction
1% to 99% 200lpi. Depend upon capability of imaging device
Run length
50,000 impressions with UV ink; 300,000 impressions with ordinary ink;
FM capability
20 micron stochastic.
Developer
TPD-III developer(26±1°C, 25±5S)/TPD-80 developer(26±1°C, 25±5S) are recommended and the replenishment with the above mentioned developers.
Development
Huaguang TPD-80, 23°C/25 seconds, Kodak Goldstar Premium/IMAF Therm 830 23°C/30 seconds
Packaging
0.15mm 100 pieces/box
0.25/0.30mm 50 pieces/box if length <1030mm;
30 pieces/box if length ≥1030mm;
25 pieces/box if the area > 1m2
Shelf life
18 months, under recommended storage conditions
Transport and storage
Plates should be kept at a place dry and cool. The shelf life could be up to 12 months with a temperature between 15-30°C and RH 25-60%. They also should avoid the place where is too close to water tank, chemical reagent or direct sunlight. Plates should be used up as quickly as possible after unpack and they should be put in the original package and take measures to avoid light if they need short-term storage. Usually, under the yellow light, it can be left for 8 hours, and 2 hours under white or natural light.
Operation
Unpack under day light or yellow light, it is suggested that the plate making room avoid natural light. For manual or semi-automatic plate-making equipments, when loading and unloading plates, we should avoid scratch, which may in uence plate properties.
PRODUCT SHOW
TP-U Double layer coating thermal ctp plate huaguang positive thermal CTP plate
TP-U Double layer coating thermal ctp plate huaguang positive thermal CTP plate TP-U Double layer coating thermal ctp plate huaguang positive thermal CTP plate TP-U Double layer coating thermal ctp plate huaguang positive thermal CTP plate
PACKING WAY
MAIN PRODUCT
COMPANY INFORMATION
FAQ
TRANSPORT
https://www.huabaoiguang.com/double-layer-ctp-plate/