Baoji Jintaoyue has been specailizing titanium plates, titanium tubes, titanium rods and other rare metals processing for 13 years.
Titanium is a very excellent metal, with high stability, good corrosion resistance, and it is also very light,and will not rust easily. Compared with stainless steel plate, titanium has much more advantages, in addition to the function of stainless, each performance is better than stainless steel, corresponding higher in price. So the main application fields of titanium plate are aviation, medicine, scientific research and so on.
chemical components:
Physical performance
Titanium Sheets Introduction
Dimensions: δ0.5~δ100in stock for cutting
Material: GR1/GR2/ GR5/GR7/ GR12/GR16/GR23
Executive standard: ASTM B265
Production process: cold rolling, hot rolling,
Surface:pickling surface, bright surface.sandblasting surface.
Titanium Sheets Feature
1. The oxide film on the surface of the titanium plate is equivalent to a good wear-resistant separation agent. The use of the titanium plate saves the separation agent, making the plate peeling easy, and eliminating the process of pre-treatment and it’s also half lighter than the copper plate.
2. The service life of titanium plate is more than 3 times that of copper plate, up to 10 to 20 years depending on operating conditions.
3. Electrolytic copper made from titanium plate has compact crystal structure, smooth surface and excellent quality
4. Because the titanium plate does not need to be coated with a separation agent, it can avoid copper electrolyte contamination.
5. Titanium plate can increase the production capacity and reduce the production cost of electrolytic copper, so it has better economic benefit.
Manufacturing Processing of Titanium Sheets
Hot Forging- The forging process at temperature higher than metal recrystallization one.
Hot rolling - the process of rolling at temperatures higher than recrystallization one.
Cold rolling- rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: a kind of heat treatment process in which metals are heated slowly to a certain temperature for sufficient time, and then cooled (usually naturally down and sometimes controlled) at a suitable rate
Pickling: Immersing the product in an aqueous solution, such as sulfuric acid, to remove oxides and other thin films on the metal surface. Pickling is electroplating, enamel, rolling and other processes of pre-treatment or intermediate treatment.
https://www.jtytitanium.com/titanium-sheet/