Stainless bearing also have better thermal properties in that they don't hold heat like steel. Heat buildup can lead to machine failure, especially with inadequate lubrication. Many would prefer to avoid that mess if they can.
Angular contact ball bearings always catch people's attention for that they can be applied to meet various requirements. They can accommodate single direction axial loads when designed for radial loads. And they are generally used in a duplex arrangement under radial loads and the resulting axial force component.
What is the contact angle? The definition of it is the angle formed by the line upright with axes of bearings and the line which connect the grounders and contact of rollaway. The carrying capacity of axial load is decided by it, the bigger contact angle, the higher carrying capacity of axial load.
Angular contact High speed Professional bearing 608ZZ can be further divided into various types. Single row angular contact ball bearings can stand unite axial and radial load, but radial load takes the main part at the same time. They can also endure pure radial load, except tandem type, configuration the other two kinds of configuration that can both stand the axial load from any direction. While carrying radial load, they can also arouse additional axial force. Therefore, we need to use bearings in pairs, and make random partnership combined bearings.
Single row angular contact ball bearings have different structure types. Non contact-type is one of them. The ferrule channels of these bearings have fore shaft, so two ferrules can not be separated. According to the contact angle, it can be divided into 3 types. The first one has a contact angle of 40°which is suitable to suffer bigger amount of axial load. The second one has a contact angle of 25°which is mainly used for precision main shaft bearings. And the third one has a contact angle of 15°which is mainly used for larger size precision bearings.
Additionally, the divergence type is also very important. Generally, there's no fore shaft in outside track rollaway nest, and it can be separated with inside track, retainer, and steel balls so that it can be installed separately. Such kind of bearings usually is mini type bearings whose internal diameter is less than 10mm. And they are used in peg-top rotor, tiny electromotor and so on. Such equipment has a high requirement of dynamic balance, noise, libration, stability.
Finally, Self-lubricating bearing resist oxidation and corrosion which is a huge bonus. All the bearings need is a tiny amount of grease or oil in order to operate best. This makes them perfect for applications where lubrication is not available or unacceptable.
There is a fear of investing in cheaper versions. In these ceramic bearings, once they heat up the ceramic portion tends to separate from the steel interior. A simple way to avoid this catastrophe is to work with a well-known and trusted manufacturer.
If one is unaware of a manufacturer, they can get recommendations from colleagues or do an internet search. Check with the BBB or Better Business Bureau to avoid investing in faulty bearings.
http://www.runbearing.com/